RPP-GUN-NC Profesional Gun for Polyurethane Foams
Professional applicator gun for polyurethane foams.
Features and benefits
- Reliable tool for professionals enabling multiple applications of polyurethane foam.
- Solid construction
- Easy application
- Adjusting the flow out of the foam
- Simple maintenance
- Durability
Base material
-
Concrete
-
Concrete Slab
-
Solid Concrete Block
-
Plasterboard
-
Gypsum Fibreboards
-
Aerated Concrete Block
-
Ceramic Hollow Block
-
Hollow Lightweight Concrete Block
-
Wood
-
Chipboard
-
High-Density Natural Stone
-
Masonry
-
Hollow Brick
-
Solid Brick
-
Solid Sand-lime Brick
-
Silicate Blocks
-
Hollow Sand-lime Brick
-
Vertically-perforated Clay Block
-
Ceramic Hollow Blocks in high dimensional tolerance class TLMB
-
Aerated Concrete in TLMB dimensional tolerance class
-
Silicate Blocks in high dimensional tolerance class TLMB
-
PVC Profile
-
Window Profile
.png)
For use also with
-
Hollow Lightweight Concrete Block
-
Solid Concrete Block
-
Silicate Blocks
-
Lightweight Concrete Block
-
Vertically-perforated Clay Block
-
Hollow Brick
-
Hollow Sand-lime Brick
-
Solid Sand-lime Brick
-
High-Density Natural Stone
-
Hollow-core Slab
-
Concrete Slab
-
Gypsum Fibreboards
-
Ceramic Hollow Block
-
Non-plastered, Pressure-resistant Insulation Boards
-
Polystyrene (EPS) Boards
-
XPS Extruded Polystyrene Insulation Boards
-
Mineral Wool Boards
-
Aluminium
-
Plywood
-
Chipboard
-
Plasterboard
-
Oriented Strand Board
-
Stainless Steel
-
Sandwich Pannel
 boards_WebRes.png)
Applications
- The application of PU foam: installation of windows and doors, filling, sealing, insulation in the construction industry
Installation guide
- Wear protective gloves. Shake can vigorously (30 sec) to mix the ingredientsand. Attach applicator gun and hold can upside-down during application.
- After emptying can disconnect the gun from the can with PU foam and immediately screw the next can in order to continue working.
- When work is finished, there is a possibility to leaving the can connected with the gun. To avoid accidental foam application block the handweel.
- Disconnect the gun from the can with PU foam. Spray basket of gun using Rawlplug PU Foam Cleaner.
- To avoid foam curing inside the gun connect the can with the gun - screwing it into the basket of the gun.
- To clean the gun connect the can with the gun - screwing it into the basket of the gun. Press the trigger several times until the gun is completely cleaned.
- Once the foam cures in the gun, solvent will not dissolve it. Never use water to clean the gun. Cured foam may damage the gun. It can be removed mechanically. When foam cures in gun unscrew the regulation handwheel and remove the needle.
- Clean the needle with non-abrasive product. Grease the needle before placing it in the gun.
- Thoroughly dry all cleaned surfaces.
