RPP-FIX-60S Express polyurethane adhesive

Professional fast foam adhesive with high adhesion to many materials and substrates

Features and benefits

  • Initial tack after 60 seconds
  • Mechanical anchoring after 2h
  • Complete hardening time after 24h
  • Wide range of applications
  • Excellent adhesion to common construction materials
  • Easy and convenient application

For use also with

  • Polystyrene (EPS) Boards

    Polystyrene (EPS) Boards

  • Plasterboard

    Plasterboard

  • PVC Profile

    PVC Profile

  • Metal Sheet & Profiles

    Metal Sheet & Profiles

  • XPS Extruded Polystyrene Insulation Boards

    XPS Extruded Polystyrene Insulation Boards

  • Oriented Strand Board

    Oriented Strand Board

  • Mineral Wool Boards

    Mineral Wool Boards

  • Timber

    Timber

  • Solid Brick

    Solid Brick

  • Concrete

    Concrete

  • Ceramic Hollow Block

    Ceramic Hollow Block

  • Silicate Blocks

    Silicate Blocks

Applications

  • Installation of plasterboards and OSB boards for walls and floors
  • For bonding expanded polystyrene boards (EPS), extruded polystyrene boards (XPS) and polyurethane rigid foam boards (PUR)
  • Insulation of containters or garages
  • Filling gaps in thermal insulation
  • Fastening of ceramic blocks, aerated concrete blocks and silicate blocks
  • Installation of window sills and stairs
  • For bonding decorative elements, coffers, floor moldings

Installation guide

Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
  1. Wear protective gloves. Ensure surfaces are free from dust, dirt, lime or grease. If the wall surface is dirty it must be primed.
  2. Before using, make sure that the can temperature is above zero (optimum +20°C). Application temperature from +5°C up to +30°C.
  3. Shake can vigorously for 30 seconds to mix properly components.
  4. Screw gun onto the can. Hold can upside-down during application.
  5. Moisten surfaces with water prior to application.
  6. Fill gaps from down to up, zigzag motion, alternating from one wall to the other. Fill gaps to approximately 60 % volume. Max. wide of the gap 3-4 cm. Wider gaps should be applied after hardening of the previous layer. Each layer should be moistened with water using a spray.
  7. After full curing, cut the excess foam with a knife and protect it from UV exposure by coating with plaster, paint, acrylic or silicone.
  8. In the event of a stoppage exceeding five minutes duration, wipe the nozzle with cleaner for foam applicator.
  9. After removing the applicator gun from the can, wipe down the nozzle and gun (internal and external surfaces) using a cleaner.

Downloads

Need documents for other product? Visit our Technical Library.

go to library