R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake
Threaded rod 5.8 grade steel, zinc flake (ZF) with increased corrosion resistance, for use with bonded anchors
Technical Data Sheet
R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake - Technical Data SheetFeatures and benefits
- Hexagonal head for convenient use with torque wrench
- Special zinc flake corrosion-resistant coating
- Can be post-installed through fixture in some cases. (Consult technical advisory service)
Product information
Size |
Product Code |
Anchor |
Fixture |
|||||
Diameter |
Length |
Max. thickness tfix for: |
Hole diameter |
Max. thickness tfix for: |
||||
d |
L |
hnom, 6d |
hnom, 12d |
df |
hnom,min |
hnom, 12d |
||
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
||
M10 |
R-STUDS-10130-ZF |
10 |
130 |
58 |
- |
12 |
48 |
- |
M12 |
R-STUDS-12160-ZF |
12 |
160 |
73 |
1 |
14 |
65 |
1 |
Applications
- Fastening with bonded anchors
- Balustrading & handrails
- Barriers
- Cable trays
- Consoles
- Curtain walling
- Formwork support systems
- Heavy machinery
- Lamps
- Safety barriers
- Road Signs
- Railings
- Public seating
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Clean the hole thoroughly with hand pump and hole brush
- If required, insert the mesh sleeve into position
- Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
- Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached
- Leave undisturbed until curing time of resin has elapsed
- Attach fixture and tighten the nut to the required installation torque
