R-STUDS Metric Threaded Rods - Steel Class 10.9, Flat Head
Threaded rod 10.9 grade steel for use with bonded anchors.
Technical Data Sheet
R-STUDS Metric Threaded Rods - Steel Class 10.9, Flat Head - Technical Data SheetFeatures and benefits
- Threaded rod mades of carbon steel class 10.9 is suitable for outdoor use and in damp conditions
- Class 10.9 provide much more greater tensile and yield strength than the ordinary class 8.8
- Threaded rods provide high strength and good wear resistance
- Can be post-installed through fixture in some cases. (Consult technical advisory service)
- Flat head for quick manual installation without a setting tool
Product information
Size |
Product Code |
Anchor |
Fixture |
|||||
Diameter |
Length |
Max. thickness tfix for: |
Hole diameter |
Max. thickness tfix for: |
||||
d |
L |
hnom, 6d |
hnom, 12d |
df |
hnom,min |
hnom, 12d |
||
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
||
M20 |
R-STUDS-20200109FL |
20 |
200 |
57 |
- |
22 |
57 |
- |
Applications
- Oil and gas industry
- Pharmaceutical processing industry
- Fastening with bonded anchors
- Barriers
- Curtain walling
- Heavy machinery
- Safety barriers
- Public seating
- Heat exchangers
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Clean the hole thoroughly with hand pump and hole brush
- If required, insert the mesh sleeve into position
- Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
- Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached
- Leave undisturbed until curing time of resin has elapsed
- Attach fixture and tighten the nut to the required installation torque
