Rawlplug

Threaded rod made out of an austenitic special steel 1.4529 HCR classified in the highest corrosion resistance class

Stainless steel 1.4529 HCR is characterized by its high resistance to local corrosion phenomena, such as crevice corrosion, pitting, or chlorine-induced stress corrosion cracking
It demonstrates excellent mechanical properties and can be used in a wide temperature range
In contact with sulphuric or phosphoric acid, or chlorides and salts, it offers excellent resilience and resistance to wear
High-performance bonded anchors offer high load-bearing capacities
Can be post-installed through fixture in some cases. (Consult technical advisory service)
Flat head for quick manual installation without a setting tool

Drill hole to the required diameter and depth for stud size being used.
Clean the hole thoroughly with hand pump and hole brush
If required, insert the mesh sleeve into position
Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product)
Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached
Leave undisturbed until curing time of resin has elapsed
Attach fixture and tighten the nut to the required installation torque

Need documents for the product? Visit our Technical Library.

go to library

Associated products