R-SL-MA-FAST Light Fast Acrylic

Acrylic dispersion sealant

Features and benefits

  • Perfect adhesion to the most building materials (including porous)
  • No shrinkage - can be applied with a thin layer without the risk of shrinkage and cracking
  • Easy and fast application and work- filling,  smoothing and polishing seals
  • No need to use Anti-Scratch Tape
  • Dust-free grinding
  • For interior use

Base material

  • Concrete

    Concrete

  • Masonry

    Masonry

  • Wood

    Wood

  • Plasterboard

    Plasterboard

  • Oriented Strand Board

    Oriented Strand Board

  • High-Density Natural Stone

    High-Density Natural Stone

  • Plaster

    Plaster

For use also with

  • Solid Concrete Block

    Solid Concrete Block

  • Hollow-core Slab

    Hollow-core Slab

  • Concrete Slab

    Concrete Slab

  • Aerated Concrete Block

    Aerated Concrete Block

  • Hollow Lightweight Concrete Block

    Hollow Lightweight Concrete Block

  • Silicate Blocks

    Silicate Blocks

  • Hollow Brick

    Hollow Brick

  • Vertically-perforated Clay Block

    Vertically-perforated Clay Block

  • Hollow Sand-lime Brick

    Hollow Sand-lime Brick

  • Solid Brick

    Solid Brick

  • Solid Sand-lime Brick

    Solid Sand-lime Brick

  • Ceramic Hollow Block

    Ceramic Hollow Block

  • Gypsum Fibreboards

    Gypsum Fibreboards

  • Chipboard

    Chipboard

  • Oriented Strand Board

    Oriented Strand Board

  • Stainless Steel

    Stainless Steel

Applications

  • Filling cracks in walls and ceilings
  • Fast repair defects in cracks - can be sanded and painted 20 min after application
  • Grouting connections joints of drywall boards
  • Covering screw heads & bolts
  • Filling joints during installation of partition walls and suspended ceilings

Installation guide

Installation guide
Installation guide
Installation guide
  1. Clean up the gap. Surface, that the acrylic will be applied on, should be clean, free of dust, dirt, grease, oil, rust, remains of old sealant and other substances that might lower the cohesion.
  2. In case of absorptive substrates, the priming is suggested. The test of adhesion prior application is also recommended.
  3. Prior to application, protect edges with masking tape
  4. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator on to the thread, then cut at the required angle to give an aperture width suited to the joint.
  5. Use manual or pneumatic gun applicator.
  6. The applied acrylic can be smoothed with a spatula.
  7. After completing the application, wipe tools with a paper towel and wash with water.
  8. Fully dried product should be secured with plaster, paint etc.

Downloads

Need documents for other product? Visit our Technical Library.

go to library