R-SL-FIX-HIGH Advanced hybrid polymer grab adhesive

Features and benefits

  • Instant high initial tack: 500 kg/m2 on a vertical surface, 125 kg/m2 on a horizontal surface
  • Joint perfectly bonds materials that undergo thermal and mechanical stresses
  • Excellent adhesion to common construction materials
  • Solvent and isocyanates free - can be painted
  • Can be applied on wet substrates
  • Odorless, insensitive to chemicals - weak acids, alkalis,  solvents and oils
  • Can be painted after curing (including water paints)
  • Joint is completely resistant to changing weather conditions

Base material

  • Concrete

    Concrete

  • Wood

    Wood

  • Oriented Strand Board

    Oriented Strand Board

  • Plaster

    Plaster

  • Cork

    Cork

  • High-Density Natural Stone

    High-Density Natural Stone

  • Metal Sheet & Profiles

    Metal Sheet & Profiles

  • Glass

    Glass

  • Ceramics

    Ceramics

  • Protected metals  (aluminium, brass, copper,  steel, zinc-plated metal sheet)

    Protected metals  (aluminium, brass, copper,  steel, zinc-plated metal sheet)

  • Polystyrene (EPS) Boards

    Polystyrene (EPS) Boards

  • XPS Extruded Polystyrene Insulation Boards

    XPS Extruded Polystyrene Insulation Boards

  • Chipboard

    Chipboard

  • Solid Brick

    Solid Brick

Applications

  • Bonding of heavy loaded elements: window sills, frames, masking frames, shelves, panels
  • Gluing to smooth and porous surfaces
  • Bonding and sealing of many construction materials such as natural stone, wood, concrete, metal, brick, glass, mirrors, ceramics, plaster, polyurethane, plastics, chipboards, etc.
  • The connections between galvanized steel, brass and other metals.

Installation guide

  1. The surface, that adhesive will be apllied on, should be clean, free of dust, grease, rust, remains of old seal and other substances that might weaken the cohesion.
  2. Prior to application of adhesive protect edges with masking tape.
  3. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator on to the thread, then cut at the required angle to give an aperture width suited to the joint.
  4. Place the cartridge in the extruding gun and apply the adhesive with manual or pneumatic gun.
  5. Applied glue may be smoothed with a spatula or similar tool. Moisten the spatula first in special wetting agent or detergent solution.
  6. The adhesive hardens by reaction with moisture from the air, so ensure well-ventilated conditions.
  7. After completing the application, wipe tools with a paper towel and clean with solvent.

Downloads

Need documents for other product? Visit our Technical Library.

go to library