Rawlplug

Joining retaining plate with perforator for countersunk installation in mineral wool insulation boards

Usage always with screw-in insulation fixing eg. R-TFIX-8SX / KWX
Wide retaining plate improve pull-through insulation loads for the fixing point
Allows countersunk installation into all mineral wool-insulation boards with minimal lateral tensile strength and phenolic board
Accurate countersunk setting automatically sets the fixing flush with the insulation layer
Permanent contact pressure
No additional installation tool required
Quick and easy installation
Compatible with TFIX-8S-MW insulation cap

Drill a hole of required diameter and depth
Drilling depth of min 35mm in A,B,C,D materials and 75mm in Aerated Concrete Block.
Clean drilled hole 3 times.
Insert R-TFIX-TOOL-BLACK into recess in head moulding of R-TFIX-8SX screw.
Insert the fixing into the drilled hole.
When using the KWX-63 the teeth should be embedded in the insulation material after hammering.
Embedment depth of min 25mm in A,B,C,D materials and 65mm in Aerated Concrete Block.
Apply steady axial pressure, ensuring the disc of the setting tool is kept perpendicular to the fixing axis.
Steadily drive in the screw with high revs until fixing is secure (when disc touches insulation surface).

Need documents for other product? Visit our Technical Library.

go to library

Associated products