R-KEX II with Rebars as an Anchor
Premium pure epoxy resin approved for use with reinforcement bars
Features and benefits
- The strongest resin in the epoxy resin class
- Approved for use in cracked and non-cracked concrete (EAD 330499-01-0601), working life up to 100 years
- Suitable for use in dry and wet substrates including flooded holes (use category I1 & I2)
- Diamond and hammer drilling
- Seismic category C1, C2
- Very high chemical resistance – suitable for applications exposed to influence of various agents (industrial or marine environment)
- Minimal shrinkage provides option of use in diamond-drilled holes and oversized holes
- Extended working time ensures easy installation of metal components (up to 30 min. in 20°C)
- For use in positive temperatures
Product information
Product Code |
Resin |
Description / Resin Type |
Volume |
[ml] | |||
R-KEX-II-385 |
R-KEX II |
Epoxy Resin |
385 |
R-KEX-II-600 |
R-KEX II |
Epoxy Resin |
600 |
Base material
-
Non-cracked concrete C20/25-C50/60
-
Cracked concrete C20/25-C50/60
For use also with
-
High-Density Natural Stone
Applications
- Safety barriers
- Temporary works/formworks support systems
- Rebar
- Curtain walling
- Formwork support systems
- Masonry support
- Platforms
- Structural steelwork
- Rebar dowelling
- Starter bars
- Rebar missed-outs
Installation guide
- Drill hole to the required diameter and depth for rebar size being used.
- Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
- Insert cartridge into gun and attach nozzle.
- Dispense to waste until even colour is obtained.
- Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
- Immediately insert the rebar, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
Installation data
REBARS AS ANCHORS
Size |
Ø8 |
Ø10 |
Ø12 |
Ø14 |
Ø16 |
Ø20 |
Ø25 |
Ø32 |
||
Rebar diameter |
ds |
[mm] |
8 |
10 |
12 |
14 |
16 |
20 |
25 |
32 |
Hole diameter in substrate |
d0 |
[mm] |
12 |
14 |
18 |
18 |
22 |
26 |
32 |
40 |
Min. hole depth in substrate |
h0 |
[mm] |
hnom+5 |
hnom+5 |
hnom+5 |
hnom+5 |
hnom+5 |
hnom+5 |
hnom+5 |
hnom+5 |
Min. substrate thickness |
hmin |
[mm] |
hnom+30 ≥100 |
hnom+30 ≥100 |
hnom+30 ≥100 |
hnom+30 ≥100 |
hnom + 2d0 |
hnom + 2d0 |
hnom + 2d0 |
hnom + 2d0 |
Min. spacing |
smin |
[mm] |
40 |
40 |
40 |
40 |
50 |
60 |
70 |
85 |
Min. edge distance |
cmin |
[mm] |
40 |
40 |
40 |
40 |
50 |
60 |
70 |
85 |
MINIMUM EMBEDMENT DEPTH | ||||||||||
Min. installation depth |
hnom,min |
[mm] |
60 |
70 |
80 |
80 |
100 |
120 |
140 |
165 |
MAXIMUM EMBEDMENT DEPTH | ||||||||||
Min. installation depth |
hnom, max |
[mm] |
160 |
200 |
240 |
280 |
320 |
400 |
500 |
640 |
Minimum working and curing time
Resin temperature |
Concrete temperature |
Curing time* |
Working time |
[°C] |
[°C] |
[min] |
[min] |
5 |
5 |
2880 |
150 |
10 |
10 |
1080 |
120 |
20 |
20 |
480 |
35 |
25 |
30 |
300 |
12 |
Downloads
- R-KEX II with Rebars as an Anchor - Technical Data Sheet
- R-KEX-II_1488-CPR-0944-W_2021_EN.pdf
- ETA-21-0244_R-KEX-II_EN.pdf
- UKTA_R-KEXII_0836-22_6132_EN_1.pdf
Need documents for other product? Visit our Technical Library.
go to library
_1_WebResFull.png)
