R-KEM II with Threaded Rods for Concrete

Universal polyester (styrene free) resin - European Approval for 15 substrates

Features and benefits

  • Approved for use in non-cracked concrete (EAD 330499-01-0601), working life up to 100 years
  • Available in a winter version with faster curing time. It can be used from -20°C.
  • Three colors - standard, stone & gray
  • The most convenient bonded anchor for general purpose use
  • Quick, secure and simple installation
  • Product with wide spectrum of use in the medium load capacity area
  • Ideal for applications where mechanical anchors are not suitable
  • Easy dosage thanks to patented self-opening system and use of manual or electric gun
  • Option of use standard manual silicone gun
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle

Product information

Product Code

Resin

Description / Resin Type

Volume

[ml]

R-KEM-II-175

R-KEMII

Styrene Free Polyester Resin

175

R-KEM-II-300

R-KEMII

Styrene Free Polyester Resin

300

R-KEM-II-410

R-KEMII

Styrene Free Polyester Resin

410

R-KEM-II-300-W

R-KEMII-W

Low Temperature (Winter) / Rapid Cure Styrene Free Polyester Resin

300

R-KEM-II-300-S

R-KEMII-S

High Temperature (Summer) / Slow Cure Styrene Free Polyester Resin

300

R-KEM-II-175-SET

R-KEMII

Set with 4 studs and plastic sleeves

175

R-KEM-II-300-SET

R-KEMII

Set with 4 studs and plastic sleeves

300

R-KEM-II-300-STONE

R-KEMII

Stone colour Styrene Free Polyester Resin

300

R-KEM-II-410-STONE

R-KEMII

Stone colour Styrene Free Polyester Resin

410

R-KEM-II-300-GREY

R-KEMII

Grey colour Styrene Free Polyester Resin

300

R-KEM-II-410-GREY

R-KEMII

Grey colour Styrene Free Polyester Resin

410

R-KEM-II-300-SV

R-KEMII

Styrene Free Polyester Resin

300

R-KEM-II-175-PL/H

R-KEMII

Styrene Free Polyester Resin

175

R-KEM-II-300-P2G6N#1

R-KEMII

Styrene Free Polyester Resin

300

R-KEM-II-300-P2GUN#1

R-KEMII

Styrene Free Polyester Resin

300

R-KEM-II-300-PL/H

R-KEMII

Styrene Free Polyester Resin

300

R-STUDS

Size

Product Code

Anchor

Fixture

Steel class 5.8

Steel class 8.8

Steel grade A4

Diameter

Length

Hole diameter

d

L

df

[mm]

[mm]

[mm]

M8

R-STUDS-08110

R-STUDS-08110-88

R-STUDS-08110-A4

8

110

9

R-STUDS-08160

-

R-STUDS-08160-A4

8

160

9

M10

R-STUDS-10130

R-STUDS-10130-88

R-STUDS-10130-A4

10

130

12

R-STUDS-10170

-

-

10

170

12

R-STUDS-10190

-

-

10

190

12

M12

R-STUDS-12160

R-STUDS-12160-88

R-STUDS-12160-A4

12

160

14

R-STUDS-12190

-

R-STUDS-12190-A4

12

190

14

R-STUDS-12220

-

-

12

220

14

R-STUDS-12260

-

-

12

260

14

R-STUDS-12300

-

R-STUDS-12300-A4

12

300

14

M16

R-STUDS-16190

R-STUDS-16190-88

R-STUDS-16190-A4

16

190

18

R-STUDS-16220

-

-

16

220

18

R-STUDS-16260

-

-

16

260

18

R-STUDS-16300

-

-

16

300

18

R-STUDS-16380

-

-

16

380

18

M20

R-STUDS-20260

R-STUDS-20260-88

R-STUDS-20260-A4

20

260

22

R-STUDS-20300

-

-

20

300

22

R-STUDS-20350

-

-

20

350

22

M24

R-STUDS-24300

R-STUDS-24300-88

R-STUDS-24300-A4

24

300

26

M30

R-STUDS-30380

R-STUDS-30380-88

-

30

380

32

Base material

  • Non-cracked concrete C20/25-C50/60

    Non-cracked concrete C20/25-C50/60

For use also with

  • Natural Stone (after site testing)

    Natural Stone (after site testing)

Applications

  • Consoles
  • Staircases
  • Gates
  • High racking
  • Canopies
  • Sanitary appliances
  • Steel constructions
  • Railings
  • Handrails
  • Ladders
  • Cable trays

Installation guide

Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
Installation guide
  1. Drill hole to the required diameter and depth for stud size being used.
  2. Solid substrates: clean the drill hole thoroughly with brush and hand pump at least four times before installation.
  3. Insert cartridge into gun and attach nozzle.
  4. Dispense to waste until even colour is obtained.
  5. Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
  6. Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
  7. Attach fixture and tighten the nut to the required torque.

Installation data

R-STUDS

Size

M8

M10

M12

M16

M20

M24

M30

Thread diameter

d

[mm]

8

10

12

16

20

24

30

Hole diameter in substrate

d0

[mm]

10

12

14

18

24

28

35

Hole diameter in fixture

df

[mm]

9

12

14

18

22

26

33

Min. hole depth in substrate

h0

[mm]

hnom + 5

hnom + 5

hnom + 5

hnom + 5

hnom + 5

hnom + 5

hnom + 5

Min. substrate thickness

hmin

[mm]

hnom + 30 ≥ 100

hnom + 30 ≥ 100

hnom + 30 ≥ 100

hnom + 2d0

hnom + 2d0

hnom + 2d0

hnom + 2d0

Installation torque

Tinst

[Nm]

10

20

40

80

120

180

300

Min. spacing

smin

[mm]

40

40

40

50

60

70

85

Min. edge distance

cmin

[mm]

40

40

40

50

60

70

85

MINIMUM EMBEDMENT DEPTH

Min. installation depth

hnom,min

[mm]

60

70

80

100

120

140

165

MAXIMUM EMBEDMENT DEPTH

Min. installation depth

hnom, max

[mm]

160

200

240

320

400

480

600

Minimum working and curing time

R-KEM II

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

-20

-

-

5

-15

-

-

5

-10

-

-

5

-5

8 h

70

5

0

4 h

45

5

5

2 h

25

10

10

1.5 h

15

15

15

1 h

9

20

20

45

5

25

30

30

2

25

35

-

-

25

40

-

-

*For wet concrete the curing time must be doubled

R-KEMII-W

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

-20

24 h

45

5

-15

18 h

30

5

-10

8 h

20

5

-5

5 h

11

5

0

2 h

7

5

5

1 h

5

10

10

45

2

15

15

30

1.5

20

20

15

1

25

30

-

-

25

35

-

-

25

40

-

-

*For wet concrete the curing time must be doubled

R-KEMII-S

Resin temperature

Concrete temperature

Curing time*

Working time

[°C]

[°C]

[min]

[min]

5

-20

-

-

5

-15

-

-

5

-10

-

-

5

-5

24 h

180

5

0

18 h

120

5

5

12 h

60

10

10

8 h

45

15

15

6 h

25

20

20

4 h

15

25

30

1.5 h

7

25

35

1 h

6

25

40

45

5

*For wet concrete the curing time must be doubled

Associated products

  • R-STUDS Metric Threaded Rods - Steel Class A4

    R-STUDS Metric Threaded Rods - Steel Class A4

  • R-NOZ-P Dosing Plug

    R-NOZ-P Dosing Plug

  • R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

    R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

  • RT-IS Long impact sockets 1/2

    RT-IS Long impact sockets 1/2"

  • RT-MAXH Hollow drill bits Dustlessdrill SDS max

    RT-MAXH Hollow drill bits Dustlessdrill SDS max

  • RT-SDSR Drill bits Rebardrill SDS plus

    RT-SDSR Drill bits Rebardrill SDS plus

  • R-STUDS Metric Threaded Rods - Steel Class 8.8

    R-STUDS Metric Threaded Rods - Steel Class 8.8

  • R-BLOWPUMP Blow Pump

    R-BLOWPUMP Blow Pump

  • RT-SDSH Hollow drill bits Dustlessdrill SDS plus

    RT-SDSH Hollow drill bits Dustlessdrill SDS plus

  • R-STUDS Metric Threaded Rods - Steel Class 5.8

    R-STUDS Metric Threaded Rods - Steel Class 5.8

  • R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

    R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

  • RT-MAXT Turbodrill SDS MAX

    RT-MAXT Turbodrill SDS MAX

  • R-BRUSH for Automatic Cleaning System

    R-BRUSH for Automatic Cleaning System

  • R-BRUSH Manual Cleaning System

    R-BRUSH Manual Cleaning System