Rawlplug

Heavy duty anchor with small spacing and edge distances, simply installed by hammering the rebar

Approved for use with rebar in non-cracked concrete (ETAG001 Option 7)
High performance anchor, for use in safety critical applications
The system relies on the adhesion between concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
Capsule contains precise amounts of ingredients making it a very consistent product
Adhesive bond strength is not affected by unpolluted water
Suitable for dry or wet non-cracked concrete
Ideal for starter bar applications
Low cost tooling required for installation, quick and easy to install
Styrene free - virtually odourless

Product Code	Description / Resin Type
R-HAC-V-08	Styrene Free Vinylester Resin
R-HAC-V-10	Styrene Free Vinylester Resin
R-HAC-V-12	Styrene Free Vinylester Resin
R-HAC-V-16	Styrene Free Vinylester Resin
R-HAC-V-20	Styrene Free Vinylester Resin
R-HAC-V-24	Styrene Free Vinylester Resin
R-HAC-V-30	Styrene Free Vinylester Resin

Drill hole to the required diameter and depth for stud size being used.
Clean the hole thoroughly with brush and hand pump at least four times before installation.
Insert capsule into the hole.
The stud is simply hammered through the capsule using a manual or mechanical hammer (M16-M30).
Leave the anchor undisturbed unitl the curing time elapses.

REBARS AS ANCHORS